WIM MIG WELD 210S WELDING MACHINE
MIG 210S is designed with throughout research on light industries usage and automotive industries to arrive at a reliable machine to meet the requirements for the industries.
The problem caused by “Burn Through” is common in the light gauge metal welding by the MIG process has been eradicated with MIG 210S.
This is done through better circuitry in the electronic board, good quality rectification components and effective wire feeder. Finally, with careful insulation during transformer construction, with high quality lamina plates as the iron core and superior primary and secondary windings process enable us to achieve a high output with maximum efficiency for this class of power source.
Features:
|
- The MIGWELD series are easy to adjust. Coarse and fine voltage steps are clearly marked on the power source, providing easy control and quick value setting. |
|
- The MIG 210S is with internal wire feeder. |
|
- The MIG 210s has a 2 steps voltage selection. This MIGWELD welding characteristics are excellent both in CO2 and mixed gas. |
|
- Better welding parameters 0.6mm – 1.6mm (Min 30amps – Max 500amps). |
|
- Heavy duty chassis construction. |
|
- Double thermal protection for transformer and rectifier. |
|
- Ergonomic and value added features. (Tool container, torch holder and gas tray holder). |
 |
WIM MIG (GMAW): MIG210S |
|
View other products in this category: 1 2 3 4 5 6 7 8 |
(Click on the pictures above to enlarge) |
 Download Manual: 
MIG 210S is designed with throughout research on light industries usage and automotive industries to arrive at a reliable machine to meet the requirements for the industries.
The problem caused by “Burn Through” is common in the light gauge metal welding by the MIG process has been eradicated with MIG 210S.
This is done through better circuitry in the electronic board, good quality rectification components and effective wire feeder. Finally, with careful insulation during transformer construction, with high quality lamina plates as the iron core and superior primary and secondary windings process enable us to achieve a high output with maximum efficiency for this class of power source.
|
Features:
|
- The MIGWELD series are easy to adjust. Coarse and fine voltage steps are clearly marked on the power source, providing easy control and quick value setting. |
|
- The MIG 210S is with internal wire feeder. |
|
- The MIG 210s has a 2 steps voltage selection. This MIGWELD welding characteristics are excellent both in CO2 and mixed gas. |
|
- Better welding parameters 0.6mm – 1.6mm (Min 30amps – Max 500amps). |
|
- Heavy duty chassis construction. |
|
- Double thermal protection for transformer and rectifier. |
|
- Ergonomic and value added features. (Tool container, torch holder and gas tray holder). |
Technical Characteristics:
|
Mains Supply |
1-phase 50/60Hz |
|
Voltage |
220V – 240V |
|
Max. Input Current |
33A |
|
Output Rating |
210A / 24.5V |
|
Duty Cycle Rating @ 60% |
145A / 21.3V |
|
Duty Cycle Rating @ 100% |
110A / 19.5V |
|
Output Control |
Tapping |
|
Voltage Adjustment |
10 Steps |
|
Open Circuit Voltage |
18V ~ 45V |
|
Welding Range @ 50 -210A |
30A ~ 210A |
|
Filler Wire Size Range |
0.6 ~ 1.0mm |
|
Wire Feeding Speed |
1 ~ 20m/min |
|
Timer (Spot or Stitch Welding) |
0 ~ 5 sec |
|
Degree of Protection |
IPS21 |
|
Insulation Class |
H180oC |
|
KVA |
7.5 |
|
Weight |
72kg |
|
Dimension (mm) |
450 x 850 x 720
|
|
|
|
WIM MIG (GMAW): MIG210S |
|
View other products in this category: 1 2 3 4 5 6 7 8 |
(Click on the pictures above to enlarge) |
Download Manual:
MIG 210S is designed with throughout research on light industries usage and automotive industries to arrive at a reliable machine to meet the requirements for the industries.
The problem caused by “Burn Through” is common in the light gauge metal welding by the MIG process has been eradicated with MIG 210S.
This is done through better circuitry in the electronic board, good quality rectification components and effective wire feeder. Finally, with careful insulation during transformer construction, with high quality lamina plates as the iron core and superior primary and secondary windings process enable us to achieve a high output with maximum efficiency for this class of power source.
|
Features:
|
- The MIGWELD series are easy to adjust. Coarse and fine voltage steps are clearly marked on the power source, providing easy control and quick value setting. |
|
- The MIG 210S is with internal wire feeder. |
|
- The MIG 210s has a 2 steps voltage selection. This MIGWELD welding characteristics are excellent both in CO2 and mixed gas. |
|
- Better welding parameters 0.6mm – 1.6mm (Min 30amps – Max 500amps). |
|
- Heavy duty chassis construction. |
|
- Double thermal protection for transformer and rectifier. |
|
- Ergonomic and value added features. (Tool container, torch holder and gas tray holder). |
Technical Characteristics:
|
Mains Supply |
1-phase 50/60Hz |
|
Voltage |
220V – 240V |
|
Max. Input Current |
33A |
|
Output Rating |
210A / 24.5V |
|
Duty Cycle Rating @ 60% |
145A / 21.3V |
|
Duty Cycle Rating @ 100% |
110A / 19.5V |
|
Output Control |
Tapping |
|
Voltage Adjustment |
10 Steps |
|
Open Circuit Voltage |
18V ~ 45V |
|
Welding Range @ 50 -210A |
30A ~ 210A |
|
Filler Wire Size Range |
0.6 ~ 1.0mm |
|
Wire Feeding Speed |
1 ~ 20m/min |
|
Timer (Spot or Stitch Welding) |
0 ~ 5 sec |
|
Degree of Protection |
IPS21 |
|
Insulation Class |
H180oC |
|
KVA |
7.5 |
|
Weight |
72kg |
|
Dimension (mm) |
450 x 850 x 720
|
|
